Bridge bend /elbow- cutting steel supplier}

Main Product

Contact

Address:Zhengzhou city in China.

Phone:0086-371-86151827

Email:[email protected]

News

EN 10025-2 S275JR high strength steel plate
2018-11-21
EN 10025 S275JR Mild steel plate
2018-11-21
EN 10025 S275JR non-alloy structural steel plate
2018-11-21
A387 Gr11 Cl1 Boiler steel plate
2018-11-16

Bridge bend /elbow

Bending pipe application:

hydraulic pipe bender is mainly used in electric power construction, railway construction, boiler, Bridges, ships, furniture, decoration and so on aspects of pipe laying and repaired, with function, reasonable structure, simple operation, mobile convenience, fast installation, etc

The General specifications of bend:

	Welding Line	Seamless
Nominal diameter	DN250-DN900	DN25-DN600
Wall Thickness	2.0-40mm
Bending radius	R=2.5D-R=10D
Bending angle	45°,90°,180°

R=4D

Nominal dimension	Groove in the outer diameter: D	The bending radius: R Straight pipe length: L	Wall Thickness (t)
DN	mm	mm	Sch No	mm
50	57 60.3	R=200 L=350	40 80	4.0 5.6
65	76 73.0	R=260 L=350	40 80	5.0 7.1
80	89 88.9	R=320 L=350	40 80	5.6 8.0
100	108 114.3	R=400 L=350	40 80	5.9 8.8
125	133 141.3	R=500 L=350	40 80	6.3 10.0
150	159 168.3	R=600 L=350	40 80	7.1 11.0
200	219 219.1	R=800 L=700	40 80	8 12.5
250	273 273.1	R=1000 L=700	40 80	8.8 16.0
300	325 323.9	R=1250 L=700	40 80	10 17.5
350	377 355.6	R=1400 L=700	40 80	11 20.0
400	426 406.4	R=1600 L=700	40 80	12.5 22.2
450	478 457	R=1800 L=700	40 80	14.2 25
500	529 508	R=2000 L=700	40 80	16 28
600	630 610	R=2400 L=700	40 80	17.48 30.96

R=5D

Nominal dimension	Groove in the outer diameter: D	The bending radius: R Straight pipe length: L	Wall Thickness (t)
DN	mm	mm	Sch No	mm
50	57 60.3	R=200 L=350	40 80	4.0 5.6
65	76 73.0	R=325 L=350	40 80	5.0 7.1
80	89 88.9	R=400 L=350	40 80	5.6 8.0
100	108 114.3	R=500 L=350	40 80	5.9 8.8
125	133 141.3	R=625 L=350	40 80	6.3 10.0
150	159 168.3	R=750 L=350	40 80	7.1 11.0
200	219 219.1	R=1000 L=700	40 80	8 12.5
250	273 273.1	R=1250 L=700	40 80	8.8 16.0
300	325 323.9	R=1500 L=700	40 80	10 17.5
350	377 355.6	R=1750 L=700	40 80	11 20.0
400	426 406.4	R=2000 L=700	40 80	12.5 22.2
450	478 457	R=2250 L=700	40 80	14.2 25
500	529 508	R=2500 L=700	40 80	16 28
600	630 610	R=3000 L=700	40 80	17.48 30.96

Classification:

1.Intermediate frequency bend

Intermediate frequency bend is by medium frequency induction heating, the workpiece bending under the condition of local heating.Compared with the general cold bend, not only don't need a complete set of special mould, and machine volume is only about a third of the same specifications of the cold tube bending machine ~ 1/2.Intermediate frequency heat pipe bending process is existing each kind of pipe bending process in one of the most economic and effective.

2.180 degrees push pipe

180 degrees push pipe making industry is to push bend soaking in the solution tank, preferably in the solution contains every litres of 250 grams of Cr2O3, every litres of 490 grams of sulfuric acid can also, temperature range 80 ~ 85 ℃, soak time depends on the color of the need, not more than 25 minutes.Will push system after bending work clean cold water rinse, then at room down on the concentration of 250 g / 1 chlorate and 2.5 g / 1 litres of phosphate cathode in the liquid, and time is about ten minutes, current density of 0.2 ~ 0.4 A/dm2.In order to prevent damage, color after processing hardening treatment immediately, and then in hot water to rinse and dry.An important characteristic of the process is the final look of it can reflect the material of the original surface.

3.U-shaped bend

U-shaped bend of complete sets of bending dies is adopted to bend, divided into two kinds of cold heat and hot push technology.Whether what kind of machinery, equipment and pipeline, mostly use bend, mainly used in oil, gas, fluids, etc., on aircraft and its engines more occupies an important position.

We are professional Bridge bend /elbow manufacturer/mill/factory /supplier/exporter/producer. Regarding the dimension of the tubes, we can supply the common sizes and or produce according to customers' requirements.We have established steady business relations with customers from all over the world..If you need any Steel Pipe/Tubes/Seamless Pipes, please contact us by sending mail, calling, leaving message on our website. We will supply you the goods at the competitive/ lowest price. We will be your best choice and your best supplier in China. Welcome your inquiry about Bridge bend /elbow .

Bebon international can supply high quality building construction material steel templates formworks in most competitive price as a professional building construction material steel templates formwork supplier.

Social

Contact US

EQPT

QUAL