Address:Zhengzhou city in China.
Phone:0086-371-86151827
Email:
Common carbon structural steel plate S235J0 rolling with the minimum yield strength at 235Mpa, and the tensile strength shall be within 360-510 Mpa.
Low temperature impacting test shall be done under zero centigrade for EN 10025-2 S235J0 Mild steel plate.
EN 10025-2 S235J0 S235J0 Chemical Composition Max %:
| C | Si | Mn | P | S | N | Cu |
| 0.19 | - | 1,50 | 0.040 | 0.040 | 0.014 | 0.6 |
EN 10025-2 S235J0 S235J0 Mechanical Property:
| Grade | Thickness(mm) | Min Yield (Mpa) | Tensile(MPa) | Impact |
| S235J0 | 1-16MM | 235Mpa | 360-510Mpa | 20 |
|
|
|
| 27j | |
| The min impact energy is longitudinal energy 27J | ||||
Normally Controlled rolled or Air rolled for steel plate S235J0 is ok, if customer demand, normalized is better for delivery of S235J0 steel plates.
Main application of EN 10025-2 S235J0 is firstly and largely producing structural parts of the bolted and welded steel industrial area.
Address: Zhengzhou city in China.
Phone: 0086-371-86151827
Email: 
